Registered: 1 month, 2 weeks ago
Twin Flush Bathroom - Learn how to Retrofit and Upgrade Your Old Toilet
I've always been an environmentally conscious individual and as such have always made some try and keep my household eco-friendly. I've used compost heaps and recycled my plastics, papers and aluminums, but it wasn't till recently that I decided to make an effort to try and save water.
I wasn't quite sure what methodology I needed to try with a purpose to cut my teeth on water conservation so I did some research online first. I discovered low-flow showerheads, HET toilets, tips about the way to check numerous faucets and toilets for leaks, and even options on varied heavy items to put in my rest room tank, in order to displace water and use less per flush. The showerheads looked interesting at first, but then I stumbled onto something called a twin flush toilet. These twin flush systems, where one lever flushes a full tank and one lever flushes half a tank, caught my imagination. They're unique, and for my part add a specific amount of style to your bathroom.
At first I believed I would have to change my total toilet. I consider myself pretty useful but I am no plumber. I additionally had no intention of paying somebody to tear my toilet apart. That was when I stumbled across something called a twin flush rest room retrofit kit. These kits are quite cheap and I really had no problem installing one. I am going to leave it up to you to find a kit you wish to install, but the following are the steps I took to install my own twin flush kit, and if you would like to attempt it your self, they will hopefully be quite simple to follow.
1. Turn off the water supply to the bathroom and drain tank. Use a sponge to remove the excess remaining water from the tank.
2. Disconnect the tank's inlet fitting from the water supply. Unscrew the 2 bolts that hold the tank down to the toilet.
3. Disconnect the flush handle from the tank. Lay the tank down on a towel and, utilizing a channel-locking plier, unscrew the big flush valve holding nut.
4. Set up the twin flush toilet kit valve - the tapered rubber gasket goes on the inside of the tank to stop leakage. Tighten massive nut until secure.
5. Install the 2 rubber gasket tie-down bolts and their lock nuts to the bottom of the tank. Bolt the tank down to the toilet using the second set of rubber gaskets and nuts. At this stage I recommend using completely new tank tie down bolts. They are inexpensive to buy at any hardware store.
6. Assemble the new arms as per required size between the handles and the new flush valve. Chances are you'll minimize them with a hacknoticed if vital here.
7a) Insert the small and enormous handles into the handle-gap within the tank. Insert spacer if needed.
b) Hook lengthy arm into overflow tube, and short arm into release pole.
c) Slide quick and long arms into place on the handles and use clip to secure.
d) Join the refill tube from the fill valve to the nipple on the lengthy arm.
8. Open water supply to the tank. Fill slowly while checking for leaks. You might want to label the large and small handles as "full" and "half", but that is personal preference.
The way my dual flush kit works I flush my full six-liter tank with the massive handle, and the small deal with gives me a 4-liter flush. I don't have any problem with the 4-liter flush performance and I'm quite glad with the way everything turned out. You possibly can imagine that individuals often have something to say once they emerge from my bathroom, which always offers me a chuckle.
If you cherished this article and you also would like to receive more info relating to قیمت فلاش تانک توکار generously visit the website.
Topics Started: 0
Replies Created: 0
Forum Role: Participant